3M™ Static Dissipative Rubber Mats and Runners
6800 Series |
 |
|
For more information, call Electro Sonic at 1.800.56.SONIC |
For more information, call Electro Sonic at 1.800.56.SONIC |
When looking for a durable low-cost, dual layer rubber mat, look no further than the 3M Static Dissipative Rubber Mats and Runners 6800 Series. The 3M 6800 matting provides durability you expect from a dual layer rubber mat at a very competitive cost. Featuring a smooth finish, the 3M 6800 Series mat is available in Blue/Black and Gray/Black colors, and features standard sizes in 2 feet, 3 feet and 4 feet widths and 50 feet lengths. In addition, the 6800 mats are also available as 2 feet x 4 feet cut mats in Blue/Black and Gray/Black, including snaps only. |
| PART NO. |
3M STOCK ID |
DESCRIPTION |
SIZE |
RFQ |
| ft. |
m. |
| 6810 |
80001389826 |
Dissipative Rubber Table Mat, Gray |
2 x 4 |
0.6 x 1.2 |
 |
| 6811 |
80001389834 |
Dissipative Rubber Table Mat, Blue |
2 x 4 |
0.6 x 1.2 |
|
| 6840 |
80001389842 |
Dissipative Rubber Table Runner, Gray |
2 x 50 |
0.6 x 7.3 |
|
| 6841 |
80001389859 |
Dissipative Rubber Table Runner, Blue 2 |
2 x 50 |
0.6 x 7.3 |
|
| 6860 |
80001389883 |
Dissipative Rubber Table Runner, Gray |
3 x 50 |
0.9 x 15.2 |
|
| 6861 |
80001389891 |
Dissipative Rubber Table Runner, Blue |
3 x 50 |
0.9 x 15.2 |
|
| 6870 |
80001389909 |
Dissipative Rubber Table Runner, Gray |
4 x 50 |
1.2 x 15.2 |
|
| 6871 |
80001389917 |
Dissipative Rubber Table Runner, Blue |
4 x 50 |
1.2 x 15.2 |
|
|
| PROPERTIES |
TYPICAL VALUE |
| Material |
Nitrile |
| Thickness |
0.065 in. (1,7 mm) |
| Hardness |
65 Shore A |
| Width |
± .25 in. |
| *Resistance |
|
| Surface to Ground (RTG) |
< 108 ohms |
| Surface to Surface (RTT) |
< 109 ohms |
*Tested per ESD Association Standard S4.1.
**Material Might have slight color and texture variance between lots
***Mat Rolls rolls need to be unrolled before being cut. When rolled some shrinkage may occur. Please allow time for mat to relax at room temperature 24-48 hours prior to cutting.
Roll Width Tolerance: +/- .25 inches
Cut Mats Have a Tolerance of +/- .25 inches on width and length. |
For more information, call Electro Sonic at 1.800.56.SONIC. |
|
|
|
|
