Instek GDS-1022 Digital Storage Oscilloscope
Easy to use
Several acquisition mode and 19 auto
measurement functions help user to
measure the accurate property of
waveforms. The advanced auto-set
function makes the GDS-1022 catch
waveform automatically and display
waveform quickly. With arithmetic
functions, FFT function keeps user being
aware of the results by updating value
immediately. Without almost extracalculation
GDS-1000 series can provide
sufficient information of testing.
SD Card & USB Device supported
A total of 17 waveforms could be saved
into the internal memory for later recall
and display, and 2 saved reference
waveforms plus 2 live waveforms could
be shown on the screen at the same time
for comparison. SD card mass storage
and USB device port are supported,
providing storage/transfer
of measurement data and remote control
for diversified solutions
Features:
- 25 MHz / 40 MHz / 60 MHz / 100 MHz Bandwidth
- 2 Input Channels
- 250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling
- 4k Memory Length per Channel
- Peak Detect as Fast as 10ns
- Save/Recall of 15 Front Panel Settings & Waveforms
- 5.6" TFT Color Display
- 19 Auto Measurements
- Timebase Range: 1nS ~ 10nS/div
- USB Port for PC Connection
- Math Operators - Add, Subtract, FFT
- 6-Digit Real-Time Frequency Counter
 View Demo
|
Instek GPD-3303S Triple-Output Linear D.C. Power Supply
The GPD-3303S inherits the superior technology and high quality, which GW Instek
has established through its long history of power supply design and manufacturing. The GPD-3303S series provides 195W output power, three isolated output channels, high resolution output
, digital control panel, 4 sets of setup memory, USB remote control, smart cooling fan
control, high reliability, and compact size. The GPD-3303S establish a new benchmark for
economic programmable linear D.C. power supply market segment. The most remarkable feature of
this series product with minimum 1mV / 1mA resolution of GPD-3303S, which right fits into the
applications needing accurate control of power source.
Features:
- Three Independent Output : 30V/3A x 2, 2.5V/3.3V/5V/3A x 1
- 4 LED Display Sets : 3 Digits After Decimal Point
- Minimum Resolution : 1mV/1mA
- Digital Panel Control (Rotary Encoder Switch, Rubber Key With Indicator)
- Key-Lock
- User-Friendly Operation, Coarse/Fine Volume Control
- 4 Panel Settings Save/Recall (Plus Factory Settings Recall)
- Output ON/OFF
- Tracking Series and Parallel Mode
- Smart Cooling Fan Achieving Low Noise
- Warning Buzzer
- Light-Weight and Compact Design
View Demo
|
