electro sonic
Electro Sonic - P+F Product Information
PRODUCT INFORMATION PRESS INDUSTRIAL STRENGTH NEWSLETTER
Electro Sonic
HOME CONTACT SITEMAP

P+F's New Photoelectric Fiber Optic Amplifiers

Pepperl+Fuchs introduces two new lines of plastic fiber optic amplifiers, the SU18 series and SU19 series.  Both amplifiers were designed with three key customer requirements: price, performance, and simplicity.

Pepperl_Fuchs

 

Sonic Messenger Subscription

For more information, call Electro Sonic at 1.800.56.SONIC

SU18 Series

The SU18 series is a basic line of fiber amplifiers offered in either pushbutton teach or potentiometer adjustable models.  The slim, 9 mm wide housing has large highly visible LED windows that show the sensor's status, along with slide switches for selecting three different detection modes, timer functions, and light on or dark on.  Also incorporated into the housing is a locking lever to secure the fiber cable to the sensor.  Plus, the unique press-and-click feature of the SU18's housing design allows for DIN rail mounting and removal without tools.

P+F SU18

Additional SU18 Series Features:

  • 4-in-1 output
  • Standard, high-speed and high-resolution detection modes
  • Selectable 40 ms on delay or off delay
  • Weak signal output with self diagnostic function (potentiometer models only)
  • Remote teach (pushbutton models only)
  • Dynamic, Position and Maximum teach modes (pushbutton models only)
  • Cross-talk protection (in high-resolution mode)

SU19 Series

The high-performance SU19 series has a built-in illuminated 4-digit display and is available in either main or expansion units for gang mounting up to 18 amplifiers.  Unlike fiber amplifiers with dual 4-digit displays, the SU19's single percentage display is easy to interpret and just as accurate.  It also functions as the menu display for adjusting several of the SU19's advanced features.  And with gang mounting, wiring can be reduced by 70% because expansion units have just a single wire to connect.  Like the SU18 series, the SU19 has a locking lever for securing the fiber cables to the sensor and the same press-and-click DIN rail mounting.

P+F SU19

Additional SU19 Series Features:

  • Illuminated, 4-digit percentage display
  • Gang mounting up to 18 amplifiers
  • 4-in-1 output
  • Standard, high-speed, high-resolution, automatic, and glass detection modes
  • Dynamic, 2-point, maximum, and position teach modes
  • Fast, 16 kHz switching frequency (in high-speed mode)
  • Adjustable timer functions
  • Automatic gain control
  • Cross-talk protection
  • Remote teach
PART NO. DESCRIPTION DATASHEET ORDER
SU18 SERIES FIBER OPTIC PHOTOELECTRIC SENSORS
SU18-16/40a/110/115/126a SU18 series fiber optic photoelectric sensors - Fiber optic amplifier, DIN rail mountable, potentiometer adjustment, weak signal, 10-30 VDC, 4-in-1, LO/DO, 2m cable
SU18-40a/110/115/123 SU18 series fiber optic photoelectric sensors - Fiber optic amplifier, DIN rail mountable, push button teach, remote teach, 10-30 VDC, 4-in-1, LO/DO, 2m cable
SU18-40a/110/115a/123 SU18 series fiber optic photoelectric sensors - Fiber optic amplifier, DIN rail mountable, push button teach, remote teach, 10-30 VDC, 4-in-1, LO/DO, pigtail V31 connector
SU19 SERIES FIBER OPTIC PHOTOELECTRIC SENSORS
SU19.1/110/115 SU19 series fiber optic photoelectric sensors - Fiber optic amplifier, Expansion unit, 4-digit display, DIN rail mountable, remote teach, 10-30 VDC, 4-in-1, LO/DO, 2m cable
SU19/110/115/123 SU19 series fiber optic photoelectric sensors - Fiber optic amplifier, Main unit, 4-digit display, DIN rail mountable, remote teach, 10-30 VDC, 4-in-1, LO/DO, 2m cable
Home | What's New | About Us | Ordering | FAQ | Sitemap | Contact
Copyright © 2009 Electro Sonic Inc. All rights reserved. Optimized for Internet Explorer version 5 or higher.
For Customer Support, call 1-800-56-SONIC or 1-416-494-1666 (for outside of Canada and US).