Cleans glass, stainless steel, chrome, mirrors, tile, plastic, ceramic and enamel and leaves a streak-free finish. Effectively removes finger prints, light oils, and other soils. Made from 100% naturally-derived and sustainable ingredients.

Convenient pre-saturated wipes available in a pop-up dispenser. Wipe material is low linting and designed to polish as it cleans.

Features:

• Streak-free cleaning
  
• Removes fingerprints & light oils
  
• Non-flammable
  
• Non-ammoniated — safe on sensitive surfaces
  
• Biodegradable
  
• Low VOC, zero GWP
  
• Non-ozone depleting

Powerful degreaser in the tradition of Techspray’s Blue Shower® cleaners. Innovative formula uses naturally-based ingredients like citrus and soy oils to soak in and quickly cut through oil and grease.

Use full strength for heavy grease or dilute with water for general cleaning. Ideal for cleaning tools, parts, shop equipment, motors, and industrial working surfaces. Leaves high-gloss finish, so ideal for stainless steel.

Convenient pre-saturated wipes available in a pop-up dispenser. Wipe material is low linting with patented dual-texture that has scrubbing surface on one side, wiping surface on the other.

Features:

• Clean heavy oil & grease
  
• Concentrated and dilutable
  
• Non-flammable
  
• Non-corrosive, moderate pH
  
• Safe on most plastics and painted surfaces
  
• Biodegradable
  
• Low VOC, zero GWP
  
• Non-ozone depleting

Ideal for light cleaning tasks in the laboratory, repair and maintenance facilities, and more. Quickly and easily wipes up liquid and dust. Packaged in a portable dispenser that reduces lint and cross contamination.

Features:

• Low linting
  
• Eco-friendly replacement for Kimwipes (KC34155, KC34256)
  
• 100% recycled wipe & box
  
• Biodegradable & sustainable

Effectively removes all types of solder paste (e.g. water-based, RMA, noclean, lead-free) and uncured adhesive from screens, misprinted boards and equipment. Completely safe on stencils, squeegees, and equipment surfaces. Ideal replacement for IPA cleaners, which are often prohibited because of safety and environmental restrictions on VOC (Volatile Organic Compound) emissions or waste disposal issues.

One quart (with a trigger sprayer) and one gallon containers are ideal for surface and tool cleaning. Convenient pre-saturated wipes available in a pop-up dispenser. Wipe material is lint-free and resistant to tearing and shredding.

Features:

• Quickly clean paste or uncured adhesiveRemoves fingerprints & light oils
  
• Safe for stencils, tools, misprinted boards
  
• Non-flammable
  
• Biodegradable
  
• Low VOC, zero GWP
  
• Non-ozone depleting

Applications:

• Manual stencil tool, work surface, and squeegee cleaning
  
• Automatic underside wipe stencil cleaning
  
• Removes unsoldered eutectic (leaded) & lead-free solder pastes
  
• Cleans off uncured adhesives
  Note: Not for use in automatic stencil washers.

Cleans reflow ovens, wave soldering systems, and associated heat
exchanger systems by removing all types of flux residues (e.g. waterbased, RMA, no-clean, lead-free). Used for periodic preventative maintenance to keep equipment performing at peak levels. It is fast acting and more effective than IPA for baked-on flux residues.

One gallon container (1573-G) recommended for wave solder finger cleaning. Just pour into the designated reservoir of your wave soldering machine. Trigger pump on quart (1573-QT) eliminates the need for aerosol propellants, which can have a global warming impact.

Features:

• Quickly clean flux residue from oven & wave fingers
  
• Safe on warm ovens
  
• Non-flammable
  
• Biodegradable
  
• Low VOC, zero GWP
  
• Non-ozone depleting

Applications:

• For removal of baked-on flux residues from SMT oven and wave solder equipment.
  ■ Recommended for use in all brands of wave solder equipment.
  ■ Used for periodic preventive maintenance of SMT ovens and wave solder equipment.

This hydroentangled cotton wipe has high absorbency with extra low particulate and chemical extractables. Recommended for ISO 14644-1 Class 5 (US FED STD 209E Class 100) or higher cleanrooms. Ideal for stencil cleaning.

Features:

• Class 100 qualified
  
• Low chemical extractables
  
• Lint-free
  
• Biodegradable & sustainable
• High absorbency - 6 times its weight
• Made with USA grown cotton