
DATASHEET (PDF)
For more information, call Electro Sonic at 1.800.56.SONIC. |
The CU series joins the Corcom product family of Power Entry Modules, filling the need for smaller versions of our switched inlet filters and unfiltered power inlets. This series provides power entry for equipment designed for popular 1U (13/4”) height equipment racks. The filtered versions provide complete shielding, shrouded quick connect terminals and basic filtering for 1A to 15A applications, in an extremely compact size.
The design is available in snap-in and flanged mounting options. Filtered versions are also available in a new rear mount style which provides a flush appearance with enhanced EMI shielding. The unfiltered inlet snap-in versions are available in three different configurations to fit a wide vareity of panel cut-outs and thicknesses and with optional pre-connected terminals from the socket to the switch. The CU Series features a common IEC 60320-1 C-14 power inlet for international compatibility. Refer to the C, GG, P, and M Series PEMs for applications requiring additional features. |
STANDARD AND SPECS:
Maximum Leakage current, each line to ground (filtered models only) :
@120 VAC 60 Hz : .25 mA and @ 250 VAC 50 Hz: .40 mA
Hipot rating (one minute) : line-to-ground 1500 VAC, line-to-line 1450 VDC
Operating Frequency : 50/60 Hz
Rated Voltage : 250 VAC
Rated currents : 1A, 3A, 6A, 10A, 15A
Operating Voltage : 120/250 VAC
Switch : Single pole single throw
Terminal Push-on Force : 15 lb / 67 N (max) |
KEY FEATURES:
- Compact 1U (1 3/4”) Design
- 1A-15A*
- Filtered and Unfiltered
- SPST Switch
- Shrouded Quick-Connect Terminals
- Various Mounting Styles
- Lower Power Dissipitation
- Higher System Efficiency
- Lower Cooling Demand
- Underwriters Laboratories
- Recognized, CSA Certified and VDE Approved*
* 15A versions tested by Underwriters Laboratories to US and Canadian requirements and are VDE approved
at 10A @ 250 VAC.
APPLICATIONS:
Rack mounted equipment, telecom, consumer electronics, power supplies, routers, PCs, TVs, lighting, imaging equipment, set-top boxes and other applications with limited panel space. |
| Case Dimensions |
| Part Numbers |
A(max) |
B(max) |
C(max) |
D±0.004±0.100 |
E±0.004±0.100 |
F±0.004±0.100 |
Panel
Thickness |
| CUE1, CUBE1 |
1.7343.90 |
0.9624.60 |
1.3434.10 |
1.0626.90 |
1.0927.60 |
1.4536.80 |
- |
| CUS1, CUBS1 |
1.2030.60 |
0.9724.60 |
1.3434.10 |
1.0426.40 |
1.2632.00 |
- |
.025 - .082
[0.63 - 2.1] |
| CU10S1, CU10BS1 |
1.2030.60 |
0.9724.60 |
1.3434.10 |
1.0526.70 |
1.2431.60 |
- |
.028 - .039
[0.7 - 1.0] |
| CU15S1, CU15BS1 |
1.2030.60 |
0.9724.60 |
1.3434.10 |
1.0526.70 |
1.2431.60 |
- |
.047 - .059
[1.2 - 1.5] |
| CUFE1 |
1.7343.90 |
1.7544.50 |
1.3434.10 |
1.1128.10 |
1.2631.90 |
1.4536.80 |
- |
| CUFS1 |
1.2030.60 |
1.8045.00 |
1.3434.10 |
1.1128.10 |
1.2632.00 |
- |
.025 - .082
[0.63 - 2.1] |
| CUFF1 |
1.7043.10 |
1.8045.00 |
1.3434.10 |
1.2130.80 |
1.3534.30 |
1.4536.80 |
.157
[4.0] Max |
NOTE : Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric
equivalents. Dimensions are shown for reference purposes only. Specification subject to change.
|