| Weidmuller Q1 Specials - from January 1st to March 31st, 2010 |
 |
|
For more information, call Electro Sonic at 1.800.56.SONIC |
 |
 |
Rail Mountable
GFI Outlet
This DIN-rail receptacle is an
enclosed 15A GFI power outlet
that provides a convenient power
source for portable computers or
test devices for in-the-panel
troubleshooting.
- Easily snaps onto 35mm DIN-rail
- Panel mountable
- Easy to wire
- Available with ground fault
current interrupt (GFCI)
- Visual indication of power
included with GFCI
- NEMA rated enclosure with
UL94 V0 flammability rating
- cULus approved according to UL508A/CSA C22.2 No.14
- Other versions available; Consult factory
| PART NO. |
DESCRIPTION |
REGULAR PRICE |
SPECIAL PRICE |
ORDER |
| 6720005422 |
DRAC GF 15 |
$53.70 ea. |
$37.50 ea. |
 |
|
|
|
24Vdc Electronic Circuit Protection
Electronic circuit protection type ESX10-T is designed to ensure selective
disconnection of 24VDC load systems.
- Selected in fixed values from 0.5 A...12 A
- Manual ON/OFF button (S1)
- Width per unit only 12.5 mm, TS35 Rail mounting only
- UL2367, File E306740, Solid State Overcurrent Protectors
- Class 1 Div 2 and Zone 2 approved
- UL508/CSA No.14, CE marked
- Other versions available (Auxiliary contacts, Control or Reset input)*
| PART NO. |
DESCRIPTION |
REGULAR PRICE |
SPECIAL PRICE |
ORDER |
| 6720005305 |
ESX10-T TA100 0.5A |
$93.60 ea. |
$65.00 ea. |
|
| 6720005301 |
ESX10-T TA100 1A |
$93.60 ea. |
$65.00 ea. |
|
| 6720005302 |
ESX10-T TA100 2A |
$93.60 ea. |
$65.00 ea. |
|
| 6720005303 |
ESX10-T TA100 3A |
$93.60 ea. |
$65.00 ea. |
|
| 6720005304 |
ESX10-T TA100 4A |
$93.60 ea. |
$65.00 ea. |
|
| 6720005306 |
ESX10-T TA100 6A |
$93.60 ea. |
$65.00 ea. |
|
| 6720005308 |
ESX10-T TA100 8A |
$93.60 ea. |
$65.00 ea. |
|
| 6720005310 |
ESX10-T TA100 10A |
$93.60 ea. |
$65.00 ea. |
|
| 6720005312 |
ESX10-T TA100 12A |
$93.60 ea. |
$65.00 ea. |
|
*Consult factory |
|
 |
Delcon Industrial Relays & Rail Mountable Bases
The limitations of optocoupler based solid state and electromechanical relays
disappear when Delcon industrial relay modules are used. For instance, the
standard AC output module SLO24TR has near zero leakage current; requires
no minimum load; can be used with any power factor 0 to 1; is rated for both
general use and inductive loads at 3A; and is immune to both load line and
signal line spikes.
The SLO24CRA and SLO24CRA4 have similar features but for DC loads up to
300VDC. See write-up on the next page. TS35 DIN-rail mountable bases offer
screw clamp (MOS1N) or tension clamp (MOS1CCN) terminals; only 13mm wide.
TS35 and TS32 DIN-rail mountable base offers screw clamp (990892) terminals;
20mm wide.
| PART NO. |
DESCRIPTION |
REGULAR PRICE |
SPECIAL PRICE |
ORDER |
| Output Relays |
| SLO24TR |
DELCON 24VDC IN, 250VAC OUT 3A |
$44.30 ea. |
$26.50 ea. |
|
| SLO24CRA |
DELCON 24VDC IN/300VDC OUT1.8A |
$66.00 ea. |
$33.50 ea. |
|
| SLO24CRA4 |
DELCON 24VDC IN/300VDC OUT4.0A |
$76.30 ea. |
$45.00 ea. |
|
| Rail Mounted Bases |
| 9908920000 |
1 CH. DELCON OUTPUT SOCKET MOD |
$18.80 ea. |
$15.00 ea. |
|
| MOS1N |
DELCON OUTPUT BASE, LP5.08 |
$19.30 ea. |
$12.00 ea. |
|
| MOS1CCN |
DELCON OUTPUT BASE, LMZF135 |
$19.30 ea. |
$12.00 ea. |
|
|
|
|
Flexible Shaft Screw Driver & Bit Box Set
Bit holder with flexible shank for reaching awkward screws, for all bits, drive:
1/4’’ C6.3 DIN 3126 with SoftFinish grip
Weidmuller Bit Box, 9-piece with universal holder drive: 1/4’’ C6.3 DIN 3126;
output: 1/4’’ D6.3; bits: 1/4’’ C6.3
| PART NO. |
DESCRIPTION |
REGULAR PRICE |
SPECIAL PRICE |
ORDER |
| 9009630000 |
BHS 1/4 IN CHUCK W/FLEX SHAFT |
$23.60 ea. |
$15.00 ea. |
|
| 9024910000 |
POCKET-BOX WI DMS 2 |
$68.70 ea. |
$35.00 ea. |
|
|
|
 |
Advance Line Power Supplies
Insta version with low profile housing - 992889 Series
12VDC at 1.5A max. or 24VDC at 1.0A max., 52mm wide
connectPower version with narrow profile housing - 992748 Series
12VDC to 15VDC at 3A max. or 24VDC to 28VDC at 2.3A max., 57mm wide
- CSA and UL approved for ordinary location; CE marked
- CSA approved for Class 1 Division 2 / Zone 2 for hazardous locations
- cRUus approved to UL 1310 Class 2 rated (24VDC only)
- Over 1 million hours MTBF at full load at 50°C
| PART NO. |
DESCRIPTION |
REGULAR PRICE |
SPECIAL PRICE |
ORDER |
| 9928890012 |
CP-SNT 115,230VAC/12V,1.5A |
$71.10 ea. |
$55.00 ea. |
|
| 9928890024 |
CP-SNT 115,230VAC/24V,1.0A |
$71.10 ea. |
$50.00 ea. |
|
| 9927480012 |
CP-SNT 115,230VAC/12-15VDC 3A |
$140.70 ea. |
$90.00 ea. |
|
| 9927480024 |
CP-SNT 115,230VAC/24-28V,2.3A |
$140.70 ea. |
$85.00 ea. |
|
|
|
 |
Cable Cutters
Cutting without deformation of the copper or aluminium conductor.
- Version up to 8mm ø, 16mm2 / 6 AWG
- Version up to 12mm ø, 35mm2 / 2 AWG
- Version up to 20mm ø, 70mm2 / 2/0 AWG
- Cutting formation for different cable sizes
increases the quality of the cuts for
smaller cross-sections
|
- Easy handling with automatic
opening
- Safety lock reduces risk of injury
- Not suitable for steel wires, steelarmoured
cables, aluminium alloys
and hardened copper conductors!
|
| PART NO. |
DESCRIPTION |
REGULAR PRICE |
SPECIAL PRICE |
ORDER |
| 9002650000 |
KT 8 CABLE CUTTER |
$54.30 ea. |
$24.00 ea. |
|
| 9002660000 |
KT 12 CABLE CUTTER |
$48.90 ea. |
$26.30 ea. |
|
| 9002300000 |
KT 20 CABLE CUTTER |
$107.60 ea. |
$65.00 ea. |
|
|
|
|
|
