 Providing you with the right connection for your Lighting Applications
|
For more information, call Electro Sonic at 1.800.56.SONIC |
 |
SMT and Thru-Hole
Poke-In Wire Lighting
Connectors
The low profile SMT and Thru-Hole Poke-In Wire
connectors are designed for lighting applications.
Available in surface mount and thru-hole tape and reel
packaging, the connectors are designed to accept a
wide range of wire sizes and types
KEY FEATURES
- Connectors are available in 1 and 2 positions
- Standard and Low Insertion Force
connectors available
- Accepts 18, 20 and 22 AWG solid wire; 18 and 20 AWG pre-bond stranded wire; 18 AWG stranded wire
- Connectors are available in both black and white colors for polarity
- Gel-filled versions are available for indoor moisture and outdoor application
- Low profile design
- Rounded corners to minimize shadowing
- Flat top surface allows for vacuum pickup
- High temperature material for reflow processing
- Redundant SMT pads prevent peeling
- Side by side stackable with pads on 4mm centers
- Tape and reel packaging for high speed SMT and Thru Hole processing
- RoHS compliant
- Cost effective alternative to hand soldering wires to printed circuit boards
|
APPLICATIONS |
LED Lighting Controls
General illumination LED fixtures
Interconnecting strings of printed circuit LED light modules
Various non-lighting applications that require attaching
flying leads to printed circuit boards |
ELECTRICAL |
250VAC / 5A
250VDC / 5A
1500VAC dielectric withstanding voltage |
MECHANICAL |
Operating Temperature: -40° to +105° C
Wire Retention: 5 lbs minimum |
MATERIALS |
Housing: UL 94 VO rated high temperature resistant
thermoplastic
Contacts: Tin over nickel plated copper alloy |
STANDARDS & SPECS |
• Standard Product Application Specification: 114-13194
• Standard Product Design Objectives (Product
Specification) 108-2284
• Low Insertion Force Application Specification
114-13226
• Low Insertion Force Design Objectives (Product
Specification) 108-2284-1 |
PRODUCT OFFERING |
Standard Product Offering:
• 1 Position SMT: 2008563-1
• 1 Position SMT: 2008563-2 (Color: Black)
• 2 Position SMT: 1954097-1
• 1 Position Thru-Hole: 2008839-1
• 2 Position Thru-Hole: 2008106-1
Wire Sizes:
• 18, 20 and 22 AWG Solid
• 18 & 20 AWG Pre-bond Stranded
• 18 AWG Stranded (16 Strands Only)
Low Insertion Force Product Offering:
• 1 Position SMT: 2008683-1
• 1 Position SMT: 1-2008683-2 (Color: Black)
• 2 Position SMT: 2008683-2
• 2 Position SMT: 1-2008683-1 (Color: Black)
• 1 Position Thru-Hole: 2008683-3
• 1 Position Thru-Hole: 1-2008683-3 (Color: Black)
• 2 Position Thru-Hole: 2008683-4
• 2 Position Thru-Hole: 1-2008683-4 (Color: Black)
Wire Sizes:
• 18 and 20 AWG Solid
• 18 & 20 AWG Pre-bond Stranded
• 18 AWG Stranded (7, 9 & 16 Strands Only)
Standard Gel-Filled Product Offering:
• 1 Position SMT: 2008994-1
• 2 Position SMT: 1954785-1
• 1 Position Thru-Hole: 2008995-1
• 2 Position Thru-Hole: 2008996-1
Wire Sizes:
• 18, 20 and 22 AWG Solid
• 18 & 20 AWG Pre-bond Stranded
• 18 AWG Stranded (16 Strands Only) |
| |
LIGHT-N-LOK
Connectors
A connector for fluorescent ballast lighting applications provides a hot-pluggable disconnect to allow safe field servicing without exposing personnel to electrical shock hazards. Available in 2 or 3 positions, LIGHT-N-LOK connectors feature an integral strain relief to maximize wire retention by preventing inadvertent wire twisting and pullout.
KEY FEATURES
- Available in 2 and 3 position sizes
- Poke-in termination for 18
AWG solid wire for easy tool-less, field or factory installation
- Integral strain relief
prevents inadvertent wire
twist out and pull out
- Designed for hot plugging
- Snag resistant rounded
housings
- Compact connector
housings: 2 pos. assembly
fits through a 5/8” dia.
knock-out opening;
3 pos. assembly fits
through a 7/8” dia.
knock-out opening
- Connector latches prevent
unintentional disconnect
of connector
- Standard 3/8” wire strip
length
- Can be supplied as
pre-assembled mated
connector sets with or
without factory installed
flying leads
- Product is marked (English/French) in
support of CSA Luminaire
Labeling Requirements
|
APPLICATIONS |
Commercial lighting applications for UL2459
Hot-pluggable interconnect for fluorescent ballast applications
Meets new NEC and CEC requirements (see below) |
STANDARDS & SPECIFICATIONS |
| Product Specification: |
108-2275 |
| Application Specification: |
2 Pos.
3 Pos. |
114-13204
114-13207 |
| Instruction Sheet: |
2 Pos.
3 Pos. |
408-10153
408-10154 |
UL Standards Publication 2459:
2 Pos. UL Listed, ZMNA.E308110 |
Insulated Multi-Pole
Splicing Wire Connectors |
CSA Std. C22.2 No. 1823-M1987
2 Pos. CSA Certified under
LR 7189, Class 62330-01 |
With Current Interruption |
| National Electrical Code: |
NFPA-070 NEC
Paragraph 410.73 (G) |
| Canadian Electrical Code: |
22.1-06
Paragraph 30-308 (4) |
| Flammability Rating: |
UL 94V-0 |
| Current Rating: |
5 Amps |
|
MECHANICAL |
Wire retention - strain relief retention exceeds 25 pounds
Polarized engagement
Squeeze-to-release latches |
ELECTRICAL |
| Rated: 600VAC;5A |
MATERIALS |
Contacts: Tin-plated copper alloy
Housing: Polyamide UL 94V-0
RoHS Compliant |
| |
