PRODUCTS SUPPLIERS NEWS ABOUT US CONTACT US
1-800-56-SONIC Track My Order
MY ACCOUNT

ACCOUNT

LOGIN

LOGOUT

ENGLISH

ENGLISH

FRENCH

CAD

CAD

USD

)
PRODUCTS SUPPLIERS NEWS ABOUT US CONTACT US


Altech DC-UPS Back-Up Devices and FLEX Power Supplies
DC-UPS solutions include the All-In-One DC-UPS (battery based), power supply, battery charger, battery care module and backup module in one device. Plus the unique Ultra-Capacitors DC-UPS (no battery needed). The FLEX line of power supplies with Power Boost (up to 150%) are suitable for a wide range of input voltages.
  • CBI - All-In-One DC-UPS: power supply, battery charger, battery care module and backup module in one device
  • CBI - available in 12VDC, 24VDC and 48VDC
  • Ultra-Capacitors DC-UPS with no battery needed
  • Using Ultra-Capacitors means environmentally safe, no toxic chemicals, virtually maintenance free
  • Flex power supplies with Power Boost for flexibility in input voltage
  • Flex power supplies with multiple overload/ short circuit protection modes

Read More

CBI All-in-One DC-UPS Power Solutions

 

Everything and more!

  • More efficiency of the battery thanks to continuous control over time.
  • More monitoring in main connection nodes: input, output load, battery.
  • Event logging: number of battery charging cycles, charge cycles completed, aborted charge cycles, Ah charged, charging time, total number of transitions stand-by /back-up etc.
  • Event Management: checking the load output, shutdown management of PCs (UPS function), RESET management of a generic equipment.
  • Flexibility of use: customization of the entire charging curve of the battery, battery type setting, setting of the various time-out algorithms of charge, setting boost voltage, absorption, float, etc... configuration as DC-UPS or batteries charger, enabling power supply function.

 

These devices are completely automatic and can charge any kind of battery using factory pre-set charging curves suitable to the most common battery technologies: open lead acid, sealed lead acid, lead gel, Ni-Cd and Ni-MH. These devices are very flexible and can be customized to meet the needs of the user and the requirements of the application. After the installation, it is possible to carry out functional software updates just using any laptop computer. Doing so, your system can always be updated to changing requirements. The Battery Care concept is based on algorithms that implement rapid and automatic charging, battery charge optimization during time, flat batteries recovery and real time diagnostic during installation and operation. Battery faults such as battery sulfated, elements in short circuit, accidental reverse polarity connection can easily be detected, identified and removed. The All in one Series meet the highest standards of quality and insure high reliability, with MTBF values up to 300.000 hours.

 

C-TEC / AC-C-TEC / CTEC-P / CEM DC-UPS Ultra Capacitor Power Solutions

 

Ultra Capacitor based technologies provide an attractive yet efficient platform for both simple and complex applications.

 

DC-UPS systems are an absolute must in a world of uncertainties. DC-UPS helps to prolong the operation of machinery and controlled processes in the event of power outages or in case of power dips and sags.

 

Altech Corporation offers a wide variety of products for DC-UPS systems starting at 2 A and up to 40 A along with monitoring / setup software, and comprehensive support.

 

The DC Back-Ups from Altech Corp.® utilize Ultra Capacitors as an innovative way to store energy within a compact design. In the event of a main power supply interruption, the energy stored in the Ultra Capacitors is released. The load is energized from the buffer module, until it‘s depleted.

 

Back up times depend on the state of the charge of the Ultra Capacitors and the load in which they are supplying. Compared with standard buffer modules, Ultra Capacitor units are capable of prolonged back-up times (up to 55 minutes) and fast discharges. Capacitors excel at controlled shutdown functions and allowing for the protection of computer systems. Back-up times are dependent on the load and amount of Capacitors within the unit. Back up times can be calculated to better serve the requirements of required functions.

 

Key Features:

  • Works primarily in an online parallel configuration
  • Controlled shut down functions
  • Up to 40 A low discharge protection through load rejection
  • Ultra Capacitors have 15 years of life
  • Quick back up recharges due to the nature of Ultra Capacitors
  • DIN rail mount

 

Benefits of Capacitor Technologies

  • Environmentally safe
  • Free of toxic chemicals
  • Virtually maintenance free
  • Wide operating temperatures
  • Long operational life (15 years or longer!)
  • Compact and convection cooled
  • Seamless switch overs
  • No need to replace or maintain batteries
  • Cost effective over time
  • Resists shock and vibrations
  • Quick buffer times

 

FLEX Power Single Phase / Two and Three Phase Power Supplies

 

More flexibility in input voltage

The FLEX line of power supplies are suitable to a wide range

of input voltage. With a single type it is therefore possible to

meet the requirements of more applications and consequently

improve design activity and stock management.

 

More Power: Power Boost

As an example, PSA-18024 is a 24Vdc power supply that features a continuous duty current of 7.5A at 110°C and 5A at 60°C and a Power Boost of 150%, equivalent to 7.5A, for at least 3 min. This features allows the use of a smaller size unit to power demanding loads such as motors, solenoid valves, lamps and other loads with transient overload behavior which would otherwise require an oversize power supply.

 

More flexibility in input voltage

As an example, PSA-18024 can be the right solution for two design cases in very different temperature conditions:

 

  1. 7.5A, 24Vdc in continuous duty at 40°C.
  2. 5A, 24Vdc in continuous duty at 60°C +Power Boost 7,5A for at least 3 min.

 

Power Good relay for monitoring the output voltage level

Output voltage is continuously monitored. The units 24 VDC output are equipped with Power Good relay. The NO contact triggers any time the output voltage level goes below 20Vdc (24 Vdc output). This feature is particularly useful in redundant applications.

 

Applications in compliance with EN 60204-1 standard

The FLEX Power units comply with the requirement of EN60204-1 standard that an overload of 50% over the nominal current be withstand by the power supply for at least 1 hour to allow the tripping of magneto-thermic switches on the output. These features allows the implementation of “Control of commands and Emergency stops” by means of industrial PCs, PLC, remote I/O, etc. required by the standard.

 

Hiccup Mode Automatic Restart

This is the default factory setting of all FLEX Power units. In case of shortcircuit or overloading, the output current is interrupted. The device tries again to re-establish output voltage and normal condition about every 2 second till the problem is cleared.

 

Manual Reset Mode Restart by Operator

In case of short-circuit or overload, the output current is interrupted. In order to restart the output it is necessary to switch-off the input circuit for about 1 minute. This protection mode is particularly suggested in applications where safety procedures require that reset be carried out only by an authorized person.

 

Continuous Output mode

In case of short-circuit or overload, the output current is kept at high values with near zero voltage. In case of short circuit the current can reach up to 3 times the rated current at 60°C. This protection mode is used to meet the requirements of demanding loads such as motors, solenoid valves, lamps, PLC with highly capacitive input circuits and other loads with marked transient overload behavior.

 

Output circuits protected by magneto-thermic circuit breakers

Standard output circuit breakers can be triggered quickly and reliably with FLEX technology, which allows three times the nominal current at 60°C. Defective current paths are selectively disconnected, the defect is limited and the important parts of the system remain in operation. This together with the 50% overload capacity in compliance with EN60204-1 allows to safely manage any overload and short circuit condition.

 

Reduced dimensions and snap-on DIN rail bracket

The higher performances obtained with the FLEX Power line, allow almost half dimensions as conventional technology and higher performances. An example is the PSA-12024 (120V) with maximum current is 12A. In permanent duty at 40°C it can deliver 5A at 24Vdc. All FLEX units feature the new DIN rail mounting bracket, easy to use and safe against heavy loading and vibrations.

 

Easy Parallel connection

With FLEX technology it is easy to double capacity. The units PSA-360, PSB-360, PSA-600 and PSB-600 can be easily connected in parallel without needing high precision instruments. Follow instructions supplied with each unit.

 

PSA

FLEX Power Single Phase 24V DC Power Supplies

 

PSB

FLEX Power Two and Three Phase 24V DC** Power Supplies

(**Other output voltages on request.)

 

  • Multiple overload/ short circuit protection modes
  • Efficiency above 91%
  • Small size
  • DIN rail mountable
  • Cooling by free air convection
  • UL508 (industrial control equipment) approved
  • EN60950-1
  • Built-in DC OK relay contact
  • 3 year warranty
RESOURCES
ALTECH
Authorized Distributor
NEED HELP?

Call us now at
1-800-56-SONIC (76642)
info@e-sonic.com
PRODUCT RANGE
Product ID INFO / IMAGE PART NUMBER   SUPPLIER  DESCRIPTION   AVAILABILITY   PRICING  
44674776 CBI123A Altech DC-UPS ALL-IN-ONE Solution - Output 12VDC-3A-36W - Input Voltage 90-305 VAC 47-63 Hz (+/-) 6% - Efficiency 90% - ...
1-2 :$301.8081 CAD
3-4 :$286.3411 CAD
5+ :$282.7084 CAD
More
»
44674806 CBI126A Altech DC-UPS ALL-IN-ONE Solution - Output 12VDC-6A-72W - Input Voltage 90-305 VAC 47-63 Hz (+/-) 6% - Efficiency 90% - ...
1-2 :$433.6055 CAD
3-4 :$411.3622 CAD
5+ :$406.1646 CAD
More
»
44674787 CBI243A Altech DC-UPS ALL-IN-ONE Solution - Output 24VDC-3A-72W - Input Voltage 90-305 VAC 47-63 Hz (+/-) 6% - Efficiency 90% - ...
1-2 :$328.1871 CAD
3-4 :$311.3649 CAD
5+ :$307.4248 CAD
More
»
44674807 CBI245A Altech DC-UPS ALL-IN-ONE Solution - Output 24VDC-5A-120W - Input Voltage 90-305 VAC 47-63 Hz (+/-) 6% - Efficiency 90% - ...
1-2 :$433.6055 CAD
3-4 :$411.3622 CAD
5+ :$406.1646 CAD
More
»
44674827 CBI1210A Altech DC-UPS ALL-IN-ONE Solution - Output 12VDC-10A-120W - Input Voltage 90-305 VAC 47-63 Hz (+/-) 6% - Efficiency 90% - ...
1-2 :$526.2814 CAD
3+ :$519.7426 CAD
More
»
44674855 CBI1235A Altech DC-UPS ALL-IN-ONE Solution - Output 12VDC-35A-420W - Input Voltage 90-135 VAC; 180-305 VAC 47-63 Hz (+/-) 6% - Efficiency ...
1-2 :$937.0009 CAD
3-4 :$925.2924 CAD
5+ :$913.8633 CAD
More
»
44674804 CB1210A Altech Battery Charger - Input 115-230-277 VAC - Output 12VDC - 10A - 120W - Efficiency >89% - Boost-Bulk charge 14.4 ...
1-2 :$433.6055 CAD
3-4 :$411.3622 CAD
5+ :$406.1646 CAD
More
»
44674834 CBI2410A Altech DC-UPS ALL-IN-ONE Solution - Output 24VDC-10-240W - Input Voltage 90-135 VAC; 180-305 VAC 47-63 Hz (+/-) 6% - Efficiency ...
1-2 :$587.6183 CAD
3+ :$580.3110 CAD
More
»
44674840 CBI485A Altech DC-UPS ALL-IN-ONE Solution - Output 48VDC-5A-240W - Input Voltage 90-135 VAC; 180-305 VAC 47-63 Hz (+/-) 6% - Efficiency ...
1-2 :$674.7334 CAD
3+ :$666.3502 CAD
More
»
44674856 CBI2420A Altech DC-UPS ALL-IN-ONE Solution - Output 24VDC-20A-500W - Input Voltage 90-135 VAC; 180-305 VAC 47-63 Hz (+/-) 6% - Efficiency ...
1-2 :$937.0009 CAD
3-4 :$925.2924 CAD
5+ :$913.8633 CAD
More
»


Resources
3DBlueHeaderSlice ALTECH: Altech DC-UPS Back-Up Devices and FLEX Power Supplies
PRODUCT SEARCH
part # / keyword
Product (Parametric)
suppliers
POLICIES
shipping
payment
returns
Track Order
ABOUT US
overview
line card
news
careers
TOOLS
Multi-Part Search
Industrial Design Resource
Harsh Env. Design Resource
Panel Builder Line Card
BOM
SUPPORT
contact us
Help / FAQ
my account
Join our newsletter


STAY CONNECTED
      © 2020 Electro Sonic Group