Congratulations, your promotion code has been activated. Discount will be automatically
applied at checkout.
|
TDR-480 is one economical slim 480W DIN rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The entire series adopts the full range AC input from 3 ψ 340VAC to 550VAC. The complete protection functions and relevant certificates for industrial control apparatus make TDR-480 a very competitive power supply solution for industrial applications.
|
|
-
Three-Phase 340 ~ 550VAC wide range input (Dual phase operation possible)
-
High efficiency 93% and low power dissipation
-
Width only 85.5mm
-
Protections: Short circuit / Overload / Over voltage / Over temperature
-
-
|
+ Read More
Read More
TDR-480 is one economical slim 480W DIN rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 85.5mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 3 ψ 340VAC to 550VAC (Dual Phase operation possible). The complete protection functions and relevant certificates for industrial control apparatus (UL508, IEC 60950-1 CB approved by UL.) make TDR-480 a very competitive power supply solution for industrial applications.
Features
- Three-Phase 340 ~ 550VAC wide range input (Dual phase operation possible)
- Width only 85.5mm
- Built-in active PFC function compliance to EN61000-3-2
- High efficiency 93% and low power dissipation
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- Optional DC OK relay contact
- 3 years warranty
Applications
- Industrial control system
- Semiconductor fabrication equipment
- Factory automation
- Electro-mechanical apparatus
RESOURCES
 |
TDR-480 Datasheet |
|
|
|
|
|
|
|
|
|
|
|
|
|
|