Login
EN
English
French
5787082-5
TE Connectivity / AMP BrandD Sub Connector - 50 Contacts - Receptacle - Through Hole - Amplimite 0.050 III Series - Steel Body. ...
DESCRIPTION
The 5787082-5 Amplimite 0.050 III series IDC D-sub Connectors offers a high-density D type interface and a solder-less board-mount interconnection. Choice of configurations includes headers with rails and latch blocks, with latch blocks only and without rails and latch blocks. It headers with ACTION PIN contacts are compatible with SCSI-2, SCSI-3, EIA RS-232, IPI-2 and HIPPI standards. The diameter of the hole is smaller than the diagonal size of the pin. The beam characteristics of the pin are designed so that a plastic, as well as elastic, deformation takes place during insertion. The two spring members compress to different degrees to accommodate hole tolerances. The compliant pin also reduces strain on the board. With a rigid pin, the elastic strain energy is stored entirely in the board, leading to damage of the plated through holes. The residual force of the elastic deformation maintains stored energy to produce a gas-tight contact zone between the pin and the plated-through-hole.
Product Highlights:
- Connector
- Connector Type = Receptacle
- Number of Positions = 50
- PCB Mount Angle = Right Angle
- Through Hole Contact Termination Type
Search Keywords: 57870825
SPECIFICATIONS
IN STOCK: 910
Ships today, if you order in
Minimum Order: 10
Multiple: 10
Factory Lead-Time 9 Weeks
3D PDF
Datasheet
Product Specification - .050 Series Shielded AMPLIMITE Connector
