Connexion
FR
English
Français
1CPSC2
The 1CPSC2 is a 1CPS series cable-pull safety switch with broken cable detection, featuring a 2NO/2NC contact configuration. ...
DESCRIPTION
The 1CPSC2 is a cable-pull safety switch designed to provide a readily accessible emergency stop signal. It features a 2NO/2NC direct-acting switching configuration with silver alloy contacts and a 20 mm conduit entry. The internal mechanism latches on both pulled and slackened cables, and it includes broken cable detection to positively open the normally closed contacts. As part of the 1CPS series, it is an economical solution for shorter cable spans up to 76 m (250 ft), making it ideal for zone protection on conveyor systems, packaging equipment, and assembly lines.
Points forts du produit:
- Direct opening actions of normally closed contacts
- Choice of 1NC/1NO, 2NC/2NO or 3NC/1NO, 4NC contact configurations
- Typical cable span of 76 m [250 ft)] in an environment with a temperature change of ±17 °C [±30 °F] an endspring is used (longer spans are possible depending upon temperature change and installtion
- Large wiring cavity with straight-through wiring
- 24 Vdc or 120 Vac single red high intensity LED status indicator light available
- Gold-plated or silver contacts available
- Die-cast zinc housing
- Optional hardware packs available
Mots-clés de recherche: 1CPSC2
SPÉCIFICATIONS
EN STOCK: 5
Peut être expédié immédiatement
DÉLAI DE L'USINE 20 Semaines
Fiche technique
Moment composant Extended Cut: Honeywell Hazard Switches
Learn more about Honeywell Toggle Switches for Aerospace and Military