help desk software
2035-25-SM-RPLF by bourns
Image non contractuelle - consultez les spécifications du fabricant
Bourns Distributeur agréé

2035-25-SM-RPLF

Gas Discharge Tubes 250VDC 5kADC 5AAC 1pF Solder Pad SMD Automotive ...

Voir la fiche technique Interroger la fiche technique
Conforme RoHS
REEL Emballage
ACCESSOIRES
Certificat de conformité

DESCRIPTION

The 2035-25-SM-RPLF is a miniature 2-pole gas discharge tube (GDT) designed for overvoltage and surge protection in telecommunications, industrial, commercial, consumer, and automotive electronics. This device features a 5 mm diameter and 4 mm length with a DC sparkover voltage of 250 V (±15%) at 100 V/s, and impulse sparkover ratings of 475 V at 100 V/µs and 625 V at 1000 V/µs. The tube exhibits high surge current capability with ratings up to 10,000 A (8/20 µs), stable breakdown characteristics throughout its operational life, and an insulation resistance exceeding 10¹° O. Operating over a temperature range of -55°C to +85°C with a glow voltage of approximately 70 V at 10 mA and arc voltage of approximately 10 V at 1 A, this UL-recognized component provides reliable protection against transient overvoltages while maintaining low capacitance below 1 pF. The device is ideal for protecting sensitive circuits in power distribution systems, signal lines, and communication networks where fast response and high reliability are essential.

Mots-clés de recherche: 203525SMRPLF

SPÉCIFICATIONS

Attribut du produit
Valeur de l'attribut
Sélectionner un attribut
Produits trouvés : 0
fournisseur:
Bourns
Référence:
2035-25-SM-RPLF
Unité de mesure:
Par Each
RoHS:
Yes
HTS:
8536308000
COO:
CR
ECCN:
EAR99
Emballage en bobine: Ces informations sont destinées aux clients qui préfèrent acheter par multiples de la quantité de conditionnement standard du fabricant. Les quantités minimales et les multiples de commande requis sont indiqués avec le prix et la disponibilité.
1500
Type de boîtier:
REEL
Tension d'amorçage aux impulsions maximale@100V/s:
475 V
Tension d'amorçage aux impulsions maximale@1KV/s:
625 V
Tension d'amorçage DC typique@100V/s:
250 V
Nombre d'électrodes:
2
Conditionnement:
Tape and Reel
Protection fail-safe:
No
Courant de décharge par impulsion typique @ 8/20us @ 10 fois:
10 kA
Tolérance de tension d'amorçage DC:
±15 %

EN STOCK: 2 500

Peut être expédié immédiatement

Quantité minimale de commande pour qté en stock: 375

Quantité minimale de commande pour qté en rupture de stock: 375

DÉLAI DE L'USINE 6 Semaines

Prix (USD)

QTÉ
Prix unitaire
375
$0.7272
750
$0.5454
1 125
$0.5090
1 500 +
$0.4988