Connexion
FR
English
Français
MLH03KPSB01A
Honeywell All Metal Pressure Sensors, MLH Series, Pressure Range 0 PSI to 3000 PSI, Units in PSI, Measurement Sealed Gage (psi)4, Electrical Termination Delphi Metri-Pack 150, Pressure Connector 1/4-18 NPT, Output Type 0.5 Vdc to 4.5 Vdc Ratiometric from 5 Vdc Excitation, Diaphragm Seal - Advanced Thick Film (ATF). ...
DESCRIPTION
An industrial pressure sensor is an electromechanical pressure-sensing device which detects the pressure imposed and converts it into an electrical signal. It measures the pressure of gases or liquids with respect to the amount of pressure applied and generate a signal which is calculated in terms of force per unit area. These pressure sensing devices are widely used in diesel engines, refrigeration and HVAC/R, general industrial and hydraulics, off-road vehicles, braking systems, natural gas vehicles and medical applications.
MLH03KPSB01A Industrial Pressure Sensor from Honeywell comes with all-wetted parts and do not have internal elastomeric seals. This Honeywell sensor is stable and creep-free and delivers fast response time, which is less than 2ms. This device features reverse voltage and output which provides protection against short circuit.
Points forts du produit:
- Amplified and temperature compensated
- Reverse voltage and output short circuit protected
- Less than 2ms response time
- Easy customization
- Rated IP65 or better
- All-wetted parts
- No internal elastomeric seals
- Stable and creep free
- Exceeds CE heavy industrial EMC for use in areas of high RFI/EMI
- Wide choice of connections and terminations
- Calibration for special pressure ranges
Mots-clés de recherche: MLH03KPSB01A
SPÉCIFICATIONS
EN STOCK: 0
sur commande:
42
Peut expédier 12/14/26
Quantité minimale de commande pour qté en rupture de stock: 7
DÉLAI DE L'USINE 22 Semaines
Fiche technique
Moment composant Extended Cut: Honeywell Hazard Switches
Learn more about Honeywell Toggle Switches for Aerospace and Military
