help desk software
TC7662BEOA by microchip technology
Image non contractuelle - consultez les spécifications du fabricant
Microchip Technology Distributeur agréé

TC7662BEOA

DC/DC Charge Pump Adjustable Voltage Regulator - 1.5V to 15V in - -15V to -1.5V/20 mA out - SOIC N - 8 Pin. ...

Voir la fiche technique Interroger la fiche technique
Conforme RoHS
TUBE Emballage
ACCESSOIRES
Certificat de conformité

DESCRIPTION

The TC7662BEOA is a charge pump DC-to-DC Voltage Converter for data acquisition systems. It converts a +1.5 to +15V input to a corresponding -1.5 to -15V output using only two low-cost capacitors, eliminating inductors and their associated cost, size and EMI. The on-board oscillator operates at a nominal frequency of 10kHz. Frequency is increased to 35kHz when pin 1 is connected to V+, allowing the use of smaller external capacitors. Operation below 10kHz (for lower supply current applications) is also possible by connecting an external capacitor from OSC to ground (with pin 1 open). The TC7662B contains all the necessary circuitry to complete a negative voltage converter, with the exception of two external capacitors which may be inexpensive 1μF polarized electrolytic types.

Mots-clés de recherche: TC7662BEOA

SPÉCIFICATIONS

Attribut du produit
Valeur de l'attribut
Sélectionner un attribut
Produits trouvés : 0
fournisseur:
Microchip Technology
Référence:
TC7662BEOA
Unité de mesure:
Par Each
RoHS:
Yes
HTS:
8542390090
COO:
TH
ECCN:
EAR99
Conditionnement standard du fournisseur: Ces informations sont fournies aux clients qui préfèrent acheter par multiples de la quantité d
100
Type de boîtier:
TUBE
Montage:
Surface Mount
Courant d'alimentation maximal:
0.16 mA
Température de fonctionnement:
-40 to 85 °C
Dimension:
4.9 x 3.9 x 1.25(Min) mm
Fonction:
Inverting
Tension d'alimentation de fonctionnement maximale:
15 V
Dissipation de puissance maximale:
470 mW
Rendement:
97(Typ) %
Famille:
TC7662
Tension d'alimentation de fonctionnement minimale:
1.5 V

EN STOCK: 600

Expédition today, Saisissez la valeur du paramètre.

Quantité minimale de commande: 100

Ce modèle de message est utilisé pour informer un affilié qu'une certaine commande a été payée. La commande obtient le statut Payée lorsque le montant a été débité.: 100

DÉLAI DE L'USINE 35 Semaines

Prix (USD)

QTÉ
Prix unitaire
100
$2.32
300
$2.27
500
$2.26
1 000
$2.25
2 500
$2.24
5 000
$2.22
7 500
$2.21
10 000 +
$2.20

Outils/Modèles 3D